C5 hydrocarbon resin used for adhesives

Light color Transparent, Low smell, Excellent anti-aging property.

As a kind of tackifying resin, C5 aliphatic hydrocarbon resin FA5100Z has played an important role in adhesive and sealant industries. FA5100Z is adequate for hot-melt adhesive. It not only has good compatibility with SIS, SBS, SEBS, SEPS and other styrene polymers, natural rubber, synthetic rubber as well as EVA and natural tackifying resins, but also improves various performance of adhesive in different degrees. Due to its characteristics of high racking and bonding strength, good viscosity, stable bonding performance, moderate melt viscosity, good heat resistance, good compatibility with polymer matrix and low price, it has been replacing natural resin tackifier (rosin, etc.) gradually and occupied a prominent place.

 

 

FIELDS USED

 

 

Hot Melt Adhesive Adhesives Shoes and leather

Rubber Industry hot-melt pressure sensitive adhesive solvent-based pressure-sensitive adhesive.

 

 

 

 

 

 

 

TYPICAL PHYSICAL AND

CHEMICAL PROPERTIES

 

Test Term	Test Method and Unit	Specification
Appearance Color Softening Point Ash Content Acid No Wax Cloud Point Flash Point Specific Gravity Melt Viscosity	Eyeballing Gardner in 50%Toluene °C ( wt.%) (mgKOH/g) (1:1:1 resin/EVA/wax), °C °C G/cm3 (200°C)mpa.s	Yellowish Granule 5 Max 95-105 0.03 Max 0.30 Max 120 Max >260 0.96-0.99 190 Max

 

 

C5 hydrocarbon resin used for adhesives